Table of Contents 263
Figure 4-194
Step 4 Configure the settings for the system maintenance parameters. See Table 4-52.
Table 4-52
Parameter
Description
Auto Reboot
In the
Auto Reboot
list, select the reboot time.
Case Fan Mode
In the
Case Fan Mode
list, you can select
Always run
or
Auto
. If
you select
Auto
, the case fan will stop or start according to the
external conditions such as the Device temperature.
This function is for some series products only. , and it is only
supported on the local configuration interface.
Step 5 Click
Apply
to complete the settings.
4.10.4.2 IMP/EXP
You can export or import the Device system settings if there are several Devices that require the
same setup.
The
IMP/EXP
interface cannot be opened if the backup operation is ongoing on the other
interfaces.
