12
Figure 5-2
8.
Set the Mode to Static and change the Start IP, Subnet Mask, and the Gateway addresses to
match your network parameters and click OK.
9.
If using a DHCP server, set the Mode to DHCP and click OK.
5.4 Accessing the Web Interface
Each camera can be accessed directly from the Internet Explorer Web browser (default IP:
192.168.1.108). The Web Interface allows you to set camera parameter, configure alarm inputs and
outputs, view live camera images, and review recorded video.
Note:
Different devices may have different Web interfaces, the figures below are for reference only,
and may not represent the Web Interface for your camera. Refer to the Web Operation Manual,
included on the CD shipped with the camera, for more details.
1.
Launch Internet Explorer and type the modified camera IP address in the address bar. Internet
Explorer opens the Login page.
2.
Type the Username and Password for the camera. (The default Username and Password is
“admin
”). Then, click Login.
Figure 5-3
3.
Install the plug-ins according to the system prompt. Once the controls are installed IE displays
the Web Interface main page.
