Network Configuration 2
2
Network Configuration
Device initialization and IP address setting can be finished with the "ConfigTool" or in web
interface. For more information, see the
Web Operation Manual
.
Device initialization is available on select models, and it is required at first use or after the
device being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stay in the same network segment.
Plan useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall
prevail.
Initializing Device
2.1
Double-click "ConfigTool.exe" to open the tool.
Step 1
Click
.
Step 2
The
Modify IP
interface is displayed. See Figure 2-1.
Modify IP
Figure 2-1
Click Search setting.
Step 3
The
Setting
interface is displayed.
Enter the start IP address and end IP address of the network segment in which you
Step 4
want to search devices, and then click
OK
.
All the devices found in the network segment are listed.
Select one or several devices with
Status
shows
Uninitialized
, and then click
Step 5
Initialize
.
