Local Basic Operation
265
On the web login dialog box, in the
Type
list, select
MULTICAST
. The web will
automatically obtain the multicast IP address and join. Then you can view the video
through multicast function.
4.12.11 Alarm Center
You can configure the alarm center server to receive the uploaded alarm information. To use
this function, the
Alarm Upload
check box must be selected.
Step 1 Select
Main Menu > NETWORK > ALARM CENTER
.
The
ALARM CENTER
interface is displayed. See Figure 4-213.
Figure 4-213
Step 2 Configure the settings for the alarm center parameters. See Table 4-62.
Table 4-62
Parameter
Description
Enable
Enable the alarm center function.
Protocol Type
In the
Protocol Type
list, select protocol type. The default is
ALARM CENTER
.
Host IP
The IP address and communication port of the PC installed with
alarm client.
Port
Self-Report Time
In the
Self-Report Time
list, select time cycle and specific time for
uploading alarm.
Step 3 Click
Apply
to complete the settings.
4.12.12 Register
You can register the Device into the specified proxy server which acts as the transit to make it
easier for the client software to access the Device.
Step 1 Select
Main Menu > NETWORK > REGISTER
.
The
REGISTER
interface is displayed. See Figure 4-214.
