Dahua Technology IVSS, User Manual

Page: 624 / 688

User's Manual
295
installation.
Step 5 Install the root certificate on the PC. See "8.6.1.1.1 Installing the Created Certificate" for
detailed information.
This root certificate is the one obtained with signed certificate.
8.6.1.2 Enabling HTTPS
After you install the certificate and enable HTTPS function, you can use the HTTPS on the PC to
access the device.
Step 1
Click , or click on the configuration page, and then select SECURITY > Credential.
Step 2 Click to enable HTTPS function.
Step 3 Click to enable Compatible with TLSv1.1 and earlier versions.
TLS (Transport Layer Security) provides privacy and data integrity between two
communications application programs.
Figure 8-92 Credential
Step 4 Click Save.
After you successfully save the settings, you can use HTTPS to access the web interface.
Open the browser, enter https://IP address:port in the address bar, and then press Enter,
and the login page is displayed.
●
IP address is device IP or the domain name.
●
Port refers to device HTTPS port number. If the HTTPS port is the default value 443, just
use https://
IP address
to access.
8.6.1.3 Uninstalling the Certificate
Uninstall the certificate.
●
You cannot use the HTTPS function after you uninstall the certificate.
●
The certificate cannot be restored after being uninstalled. Be cautious.