background image

 

 

iii 

 

Please contact the customer service for the latest procedure and supplementary documentation.  

 

There may be deviation between the actual value of some data and the value provided in the 

manual due to the reasons such as the real environment is not stable and so on. Please refer to 

the company

’s final explanation if there is any doubt or dispute.  

 

The company is not liable for any loss caused by the operation which is not followed by the manual.  

 

FCC Information  

1.  FCC conditions

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

 

This device may not cause harmful interference; 

 

This  device  must  accept  any  interference  received,  including  interference  that  may  cause 

undesired operation. 

2.  FCC compliance

 

This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference. This equipment generates uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instruction manual, may cause harmful interference to radio 

communication. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is 

connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

 

Note:  

Please refer to the disk for more details, check and download corresponding user

’s manual and tool. 

Before installation, please open the package and check all the components are included. 

Contact your local retailer ASAP if something is broken in your package. 

 

Accessory Name 

Amount 

Network Camera Unit  

Quick Start Guide  

Installation Accessories Bag 

CD 

 

 

Summary of Contents for IPC-HFW5431E-Z


















Reviews: