Quick Start Guide
3
2 Network Configuration
Device initialization and IP setting can be finished with the ConfigTool or on web page. For more
information, see web operation manual.
●
Device initialization is available on select models, and it is required at first-time use and after
device is reset.
●
Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stay on the same network segment.
●
Plan usable network segment properly for the device.
●
The following figures are for reference only.
2.1 Initializing the Camera
Step 1
Search for the device that needs to be initialized through ConfigTool.
1. Double-click ConfigTool.exe to open the tool.
2. Click Modify IP.
3. Select the searching way, and then click OK.
4. Select one or several uninitialized cameras, and then click Initialize.
Step 2
Select the devices to be initialized, and then click Initialize.
If you do not provide an email address for password reset, you can reset the password only
through XML file.
Figure 2-1 Password setting
Step 3
Set and confirm the password of the devices, enter a valid email address, and then click
