Dahua Technology IPC-HDW5842T-ZE Operation Manual Download Page 344

Page: 344 / 473

Operation Manual

Figure 7-6 Image adjustment

●

(Brightness adjustment): Adjusts the overall image brightness, and changes the value when

the image is too bright or too dark. The bright and dark areas will have equal changes.

●

(Contrast adjustment): Changes the value when the image brightness is proper but contrast is

not enough.

●

(Saturation adjustment): Adjusts the image saturation, this value does not change image

brightness.

●

(Hue adjustment): Makes the color deeper or lighter. The default value is made by the light

sensor, and it is recommended.

Click

Reset

to restore focus to default value.

You can restore the zoom if the image has poor clarity or has been zoomed too frequently.

7.4.4 Fisheye

You can select the installation mode, display mode and VR mode of fisheye devices as needed. For
details, see Table 7-5.

●

Install Mode

: Select the installation mode according to the actual situation.

●

Display Mode

: Select the display mode of live view.

●

VR Mode

: Select VR mode to display images in stereo mode.

Figure 7-7 Fisheye-ceiling mount

Summary of Contents for IPC-HDW5842T-ZE


























































































































































































































































































































































































































































































Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands

Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands