Dahua Technology IPC-HDW5842T-ZE Operation Manual Download Page 145

Page: 145 / 473

Operation Manual

131

5.1.2 Subscribing Alarm

5.1.2.1 About Alarm Types

For alarm types and preparations of alarm events, see Table 5-2.

Table 5-2 Description of alarm types

Alarm Type

Description

Preparation

Motion Detection

The alarm is triggered when
moving object is detected.

Motion detection is enabled. For

details, see "5.4.1 Setting Motion

Detection".

Disk Full

The alarm is triggered when the

free space of SD card is less

than the configured value.

The SD card no space function is

enabled. For details, see "5.19.1

Setting SD Card".

Disk Error

The alarm is triggered when

there is failure or malfunction in
the SD card.

SD card failure detection is

enabled. For details, see "5.19.1
Setting SD Card".

Video Tampering

The alarm is triggered when the

camera lens is covered or there

is defocus in video images.

Video tampering is enabled. For

details, see "5.4.2 Setting Video

Tampering".

External Alarm

The alarm is triggered when

there is external alarm input.

The device has alarm input port

and external alarm function is

enabled. For details, see "5.18

Setting Relay-in".

Illegal Access

The alarm is triggered when the
number of consecutive login

password error is up to the

allowable number.

Illegal access detection is enabled.

For details, see "5.19.3 Setting

Illegal Access".

Audio Detection

The alarm is triggered when
there is audio connection

problem.

Abnormal audio detection is
enabled. For details, see "5.6

Setting Audio Detection".

IVS

The alarm is triggered when

intelligent rule is triggered.

Enable IVS, crowd map, face

detection or people counting, and

other intelligent functions.

Scene Changing

The alarm is triggered when the

device monitoring scene

changes.

Scene changing detection is

enabled. For details, see "5.4.3

Setting Scene Changing".

Voltage Detection

The alarm is triggered when the
device detects abnormal

voltage input.

Voltage detection is enabled. For
details, see "5.19.4 Setting Voltage

Detection".

Security Exception

The alarm is triggered when the

device detects malicious attack.

Voltage detection is enabled. For

details, see "5.19.5 Setting

Security Exception".

5.1.2.2 Subscribing Alarm Information

You can subscribe alarm event. When a subscribed alarm event is triggered, the system records
detailed alarm information at the right side of the interface.

Summary of Contents for IPC-HDW5842T-ZE


























































































































































































































































































































































































































































































Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands

Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Search results

Summary of Contents for IPC-HDW5842T-ZE

Reviews:

Related manuals for IPC-HDW5842T-ZE

Brands by name

Popular brands