Quick Start Guide
3
than 12 V, please use an additional electric relay.
Figure 1-3 Alarm output
Step 3
Log in to the web page, and then configure the alarm input and alarm output in alarm
settings.
●
The alarm input on the web page corresponds to the alarm input end of the I/O port.
There will be high level and low level alarm signals generated by the alarm input device
when an alarm occurs. Set the input mode to "NO" (default) if the alarm input signal is
logic "0", and to "NC" if the alarm input signal is logic "1".
●
The alarm output on the web page corresponds to the alarm output end of the device,
which is also the alarm output end of the I/O port.
