Interface Configuration
20
16:9
Images are displayed on the scale of 16:9.
Zoom 1
Magnify images on a certain scale.
Zoom 2
Magnify images on a certain scale. Scales in Zoom 2 are larger than scales in
Zoom 1.
Just Scan
This mode allows the video wall to display the same native resolution as the
video source.
Panorama
Display in full screen.
PointToPoint
Point to point display.
Different signal modes have different zoom modes.
Step 3 Press
Menu
on the remote control to complete the setting.
4.1.8 Noise Reduction
To improve quality of images, adjust the noise reduction.
Only in CVBS signal mode can you select image noise deduction function.
Step 1 Select
Image > Noise Reduction
.
The
Noise Reduction
interface is displayed. See Figure 4-10.
Figure 4-10 Noise reduction
Step 2 Select noise reduction parameters by the up and down buttons on the remote control
according to your requirement.
Step 3 Press
Menu
on the remote control to complete the setting.
4.2 Geometry
Different signal modes have different geometry parameters.
DVI/HDMI/CVBS Signal
You can not set Geometry parameters in DVI, HDMI, and CVBS signal modes.
VGA Signal