Web Configuration 67
Select the
Switch On
tickbox from
Setting > ITC > Extra Device > Power Config
, and
Step 1
then click
OK
.
Select
Setting > Event > Alarm > Relay Activation
, select the
Enable
tickbox to
Step 2
enable alarm linkage, and then select Sensor Type as
NC
. See Figure 6-72.
Click
OK
to save the configuration.
Step 3
Enti-fog function is enabled.
Enable anti-fog function
Figure 6-72
6.5.1.9 Black/White List
6.5.1.9.1 White List Search
You can search whether a plate number is included in the white list, or you can import or export
plate number in the white list.
Select
Setting > ITC > BW List > White List Search
.
Step 1
The
White List Search
interface is displayed. See Figure 6-73.
White list search
Figure 6-73
On this interface, you can:
Search plate number: Enter the plate number (or part of it) you want to search, and then
click Search to check whether it is included in the white list.
Modify plate information: Click
to modify the detail information of corresponding plate
