Web Configuration 50
Scene setup (E-Police)
Figure 6-49
Select the type of line you want to draw.
Step 2
Draw lines on the video image.
Step 3
ANPR and E-Police modes support different types of lines, and the actual
interface shall prevail.
Click
to delete the line of corresponding color.
You can select
Vehicle Head
or
Vehicle Rear
to change the direction of lane
lines.
Configure the parameters. See Table 6-14.
Step 4
Table 6-14 Scene setup parameters
Parameter
Description
Direction
The direction of the vehicle.
If
Vehicle Head
is selected, downwards arrow will be displayed when
drawing the lane line.
If
Vehicle Rear
is selected, upwards arrow will be displayed when
drawing the lane line.
Region
The region to be detected.
A green box will be displayed when drawing region line.
Lane Line
Draw lines of the lanes to be detected.
Two lane lines are required for each lane.
The arrow direction of lane line is the direction of the vehicle.
A blue line with arrow will be displayed when drawing a lane line.
Detect Line
When a vehicle crosses the detect line, snapshot will be triggered.
Detect line only displays within the range of lane lines.
The detect line is in red.
This function is only available in ANPR mode.
Car Region
A region drawn to detect the traffic flow.
