Installation 8
Installing the lens
Figure 3-2
Insert the cable plug of lens into the auto iris lens connector on the side panel of
Step 3
camera.
Correct the focus to make the images clear.
Step 4
3.1.2 Removing the Lens
Removing the lens
Figure 3-3
Unplug the cable from the lens mount.
Step 1
Turn the lens to counter-clockwise until the lens is removed. See Figure 3-3.
Step 2
Install the protective covers of sensor and lens to prevent them from being spotted.
Step 3
TF Card
3.2
This section takes some models as the example, and the actual model shall prevail.
3.2.1 Installing TF Card
Insert the TF card according to the direction shown by the arrow. See Figure 3-4.
