Dahua Technology DHI-ARD323-W2, User Manual, Page: 17 / 20

User's Manual
12
Parameter Value
Door Status
Open or close status of the door.
●
: Open.
●
: Closed.
24 H Protection Zone
Status
Active status of the 24 h protection zone.
●
: Enabled.
●
: Disabled.
Relay Status
The status of whether the door detector forwards accessory
messages to the hub through the repeater.
The function is only available when the version of the DMSS app is
1.96 or later, the hub is V1.001.0000000.6.R.211215 or later, and
the door detector is V1.000.0000001.0.R.20211203 or later.
Program Version The program version of the door detector.
6.2 Configuring the Door Detector
On the hub screen, select a door detector from the accessory list, and then tap to configure the
parameters of the door detector.
Table 6-2 Door detector parameter description
Parameter Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap Save to save configuration.
Area Select the area to which the door detector is assigned.
Temporary Deactivate
●
Tap Enable , and then the function of the door detector will be
enabled. Enable is set by default.
●
Tap Only Disable Tamper Alarm , and then the system will
only ignore tamper alarm messages.
●
Tap Disable , and then the function of the door detector will
be disabled.
LED Indicator
LED Indicator is enabled by default. For details on indicator
behavior, see "3.1 Appearance".
●
If
LED Indicator
is disabled, the LED indicator will remain off
regardless of whether the door detector is functioning
normally or not.
●
The function is only available when the version of the DMSS
app is 1.96 or later, the hub is V1.001.0000000.4.R.211014 or
later, and the door detector is V1.000.0000001.0.R.20210818 or
later.