![background image](http://html2.mh-extra.com/html/dahua-technology/dh-wm4700-o/dh-wm4700-o_quick-start-manual_5111609006.webp)
Product Introduction 1
1
Product Introduction
Front panel
Table 1-1
Front panel description
Indicator
Status
Description
Wi-Fi
On
Wi-Fi is enabled.
Off
Wi-Fi is not enabled.
WAN
On/flash
On: WAN port is connected.
Flash: Data transmission is in progress.
Off
WAN port is disconnected.
Local network
On/flash
On: Network port is connected.
Flash: Data transmission is in progress.
Off
Network port is disconnected.
Signal strength
indicator
One light on
Weak signal strength (less than -90 dbm).
Two lights on
Medium signal strength (-70 dbm to -90 dbm).
Three lights on
Strong signal strength (more than -70 dbm).
SIM
On
SIM/UIM card is identified.
Off
SIM/UIM card is not identified.
Online
On
The Device is connected to the network.
Off
The Device is disconnected to the network.
SIM/UIM
-
For inserting SIM/UIM card.
System
Flash
The system is running normally.
Off
The system is abnormal.
Power
On
Power supply to the Device is normal.
Off
The Device is not powered on or during shutdown by
timing switch.
Rear Panel
Table 1-2
Rear panel description
Indicator
Description
ANT-M
External 4G main antenna.
Power
Connector for power adapter.
Reset
Restore factory default button. Press and hold the button for about 10 seconds
until all lights are off. And the Device can be reset to the factory default.
Console
Serial port for debugging. Baud rate is 115200 bps.
ANT-A
External 4G backup antenna.
Local Network
Four 100 Mbps LAN port for local network access.