User’s Manual
55
Set arm period
Figure 4-38
Set arming periods, and the alarm can only be triggered when it occurs during the
2)
defined period. The time period in green on the timeline is armed.
Method one: Click
Setting
of the day you want to set. Directly press and drag the
left mouse button on the timeline.
Method two: Click
Setting
of the day you want to set. Select the check box in
front of the time period to enable it. Enter start time and end time of that time
period.
Select
All
or the check box of any other day, and the set time period will apply to
the selected days.
You can set 6 time periods per day.
Click
Save
to return to the
Alarm
interface.
3)
Set other parameters. For details, see Table 4-18.
Table 4-18
Alarm linkage parameter descriptions
Parameter
Description
Enable
Select
Enable
check box to enable alarm linkage.
Relay-in
Select alarm input.
Anti-Dither
The system records only one motion detection event within the defined time
(from 0 s to 100 s).
Sensor Type
Two options: NO (Normally Open) and NC (Normally Closed). Switch from NO to
NC means enabling alarm. Switch from NC to NO means disabling alarm.
