Dahua Technology DH-PFR4K-B240, User Manual

Page: 52 / 102

User’s Manual
46
For the configuration of major mailboxes, see Table 4-13.
Table 4-13 Major mailbox configuration
Mailbox SMTP Server Authentication Port Description
QQ smtp.qq.com
SSL 465
The authentication type cannot be

None
.
You need to enable SMTP service in

your mailbox.
The authentication code is required

as password; either the QQ
password or email password is not
applicable.
Authentication code, the code you
receive when enabling SMTP service.
TLS 587
163 smtp.163.com
SSL
465/
994
You need to enable SMTP service in

your mailbox.
The authentication code is required

as password; the email password is
not applicable.
Authentication code, the code you
receive when enabling SMTP service.
TLS 25
none 25
Sina smtp.sina.com
SSL 465
You need to enable SMTP service in your
mailbox.
none 25
126 smtp.126.com none 25
You need to enable SMTP service in your
mailbox.
Click Save . Step 3
4.2.6 UPnP
Universal Plug and Play, a protocol that establishes mapping relation between intranet and
Internet. This function enables you to access intranet device through Internet. Internal port is
radar's port and external port is router's port. You can access the radar with external port. When
UPnP is not needed, you need to disable UPnP function so that other functions can be used
normally.
Enable UPnP if radar supports UPnP protocol. In Windows XP or Windows Vista system, if UPnP is
enabled, the device can automatically find it in the Network Neighborhood of Windows.
Refer to the following steps to install UPnP network service in the Windows system.
Open control panel, and select
Add or Remove Programs
. Step 1
Click Add/Remove Windows Components . Step 2
Select the
Network Services
in the
Windows Components Wizard
, and then click Step 3
Details .
Select Internet gateway device discovery and control client, and UPnP user interface, and Step 4
then click
OK
to begin installation.