9
4 Device Installation
This section details installing the Multi-Sensor camera to a wall or ceiling. Note that the wall or ceiling
must be capable of supporting a minimum of three times the weight of the camera and a bracket (if
used).
DO NOT connect the camera to the power supply during installation.
Figure 4-1
4.1 Installing the Camera
1. Remove the camera, the mounting template, multi-purpose tool, and the hardware package from
the box.
2. If you are using an SD card, turn the camera to access the bottom of the camera.
3. Insert an SD card into the SD Card Slot. Refer to Figure 4-2 for the location of the SD Card slot.
Figure 4-2
