Quick Start Guide
IV
Use the power adapter recommended by the manufacturer.
For the Camera that supports laser, do not aim the laser directly at eyes. And keep a proper
distance from the flammable to avoid fire.
Do not connect several cameras to one power adapter; otherwise it might result in overheat or
fire if it exceeds the rated load.
If there is any smoke, disgusting smell, or noise from the Camera, power off the Camera and
disconnect the power cord immediately, and contact your local retailer or customer service
center.
We will assume no responsibility for any problems (such as water intrusion or loose cables)
caused by unauthorized modifications, disassembly or repair, incorrect installation or use, and
overuse of certain components.
Requirements for Installation and Maintenance Personnel
Hold certificates or experiences related to installation and maintenance of the closed-circuit
television (CCTV), and have certificates related to working at height.
Have basic knowledge and installation skills of CCTV system.
Have basic knowledge and operation technique for low-voltage wiring and low-voltage
electronic circuit connection.
Have the ability to read and understand the manual.
Have explosion-proof related certificates.
Requirements for Lifting the Camera
Select appropriate tools and place to lift the Camera.
Make sure that the selected tools reach the installation height.
Make sure that the selected tools have high safety performance.
Storage Requirements
The warehouse should be well ventilated and free from corrosive gases; the ambient
temperature should be: T5/T100°C: –40 °C to 55 °C; T6/T80°C: –40 °C to +55 °C. The relative
humidity should be no more than 85%; there should be no strong mechanical vibration, impact
or strong magnetic field.
Keep the Camera away from fire source, and do not store it with corrosive, inflammable and
explosive materials.
If the Camera has been stored for more than 18 months, it should be resubmitted for inspection
and confirmation.
Transportation Requirements
Handle the Camera with care, and do not throw, roll or trample it.
Avoid damp, extrusion and rain during transportation.