![background image](http://html2.mh-extra.com/html/dahua-technology/dh-5208an-4kl-x-8/dh-5208an-4kl-x-8_user-manual_3204359220.webp)
Local Configurations
208
After exporting is finished, a
Message
dialog box is displayed.
Click
OK
.
Step 5
You can find the exported data on your USB device.
5.13.3 Configuring Wireless Siren
You can connect the wireless siren to the Device, when there is an alarm event activated on the
Device, the wireless siren generate alarms.
Select
Main Menu > IoT > MANAGER > Wireless Siren
.
Step 1
The
Wireless Siren
interface is displayed. See Figure 5-182.
Figure 5-182
Configure the settings for the wireless alarm output. For details, see Table 5-54.
Step 2
Parameter
Description
USB Gateway,
Camera Gateway
Auto
: Automatically activate alarm if the alarm output function
for wireless siren is enabled for specific events. For example, if
you want to enable the alarm output through wireless siren for
motion detection, see "Alarm Output" parameter in Table 5-39.
Manual
: Activate alarm immediately.
Stop
: Do not activate alarm.
Alarm Release
Click
OK to
clear all alarm output status of wireless siren.
Table 5-54
Click
Apply
to save the settings.
Step 3
Summary of Contents for DH-5208AN-4KL-X-8
