77
6.1.1.1.2 Configuring Exposure Parameters
Configure iris and shutter to improve image clarity.
Cameras with true WDR do not support long exposure when WDR is enabled in
Backlight
.
Step 1
Select
Setting
>
Camera
>
Conditions
>
Conditions
.
Step 2
Select
1
in
Channel
.
Step 3
Click the
Exposure
tab.
Step 4
Configure exposure parameters.
Figure 6-3 Exposure
Parameters and its description in Table 6-2 are based on the condition that you have
selected
Standard
as
Profile
.
Table 6-2 Description of exposure parameters
Parameter
Description
Anti-flicker
You can select from 50 Hz, 60 Hz and Outdoor.
●
50 Hz: When the electric supply is 50 Hz, the system adjusts the
exposure according to ambient light automatically to ensure that
there is no stripe appears.
●
60 Hz: When the electric supply is 60 Hz, the system adjusts the
exposure according to ambient light automatically to ensure that
there is no stripe appears.
●
Outdoor: You can select any exposure mode as needed.
