3
3-1.Use for the first time
3. Use instructions
1. Unpack and place on the horizontal surface.
Install the water receiver.
2. Steps of removing the water tank
Life and pull out the water tank, and then lift it out
after it is loose with the machine body.
3. Steps for feeding and discharging water
1.First, drain the remaining water from the
water tank.
2.Add tap water to the raw water tank (the
bigger one).
4. Install the water tank
1.Align the water tank with the base jack and
press down.
2.Close the water tank cover after pressing the
tank.
Raw water tank
Concentrated water tank
2-2.Electric Schematic Diagram
24V Adapter
Ambient
temperature
water valve
Hot water
valve
Waste
water
valve
Booster
pump
Water
pump
Power board
Dry burning
preventing
mechanical
thermostat
Dry burning preventing
mechanical thermostat
Hot tank
Hot water NTC
Display screen
Purified
water tank
water level
limit floater
High water
level floater
of purified
water tank
Low water
level floater
of raw water
tank
Placement
detection
of raw water
tank
Summary of Contents for DT-WP-20
Page 11: ......