Chapter 6 Memory Design Management
5.
If don’t use the default values provided by the system, click “New Design
number” or “New Design name” and input the new number and name.
6.
Click
to create a new design and return to the design operation
selection interface. Click
to cancel the creating and return to the design
operation selection interface.
6.6 Add Appliqué
The system has two ways for appliqué embroidery: manual frame out and automatic
frame out.
Manual frame out: when meeting stop code at embroidery, the machine will stop
automatically. User needs move the frame to the proper position for appliqué with the manual
frame-moving button. Then click
and
to return to the stop point. At last, pull
the bar for embroidery.
Automatic frame out has two ways: 1) moving frame to the offset point; and 2) setting
the distance for frame-out. The operation is as follows: Firstly, set appliqué embroidery
function for the design. Secondly, when embroidering to the appliqué point, the machine
moves to the offset point (which has to be set) or move the frame out according to the set
distance. After patching, once user pulls the bar, the machine will automatically return to the
stop point to continue embroidery.
The following is how to add appliqué embroidery to the design:
1.
Click
in the main menu to enter the memory design management
interface.
2.
Select the design in the memory design image area of the memory design
management interface.
3.
Click
to enter the design operation selection interface.
4.
Click “Add Appliqué” to set appliqué embroidery. Following list will help you
understand the interface:
Owner’s Manual of BECS- 285A Computerized Control System
57
