9
(1)
STAIN: The high level STAIN current is fed to the microelectrode.
(2)
CURRENT PUMP: The CURRENT PUMP section of the instrument is
connected through the probe to the electrode. The CURRENT PUMP
is always available through the AUX PUMP OUT BNC jack.
(3) PREAMPLIFIER: The probe and audio monitor amplifiers are connected
to the electrode.
(4) EXTERNAL: The electrode is connected to the EXTERNAL BNC sack. This
position gives direct access to the electrode for passage of any
voltage or current.
GENERAL
POWER: 115v AC, 60 Hz, 6 Watts (optional 230v AC, 50 Hz, 4 Watts)
DIMENSIONS:
MAINFRAME:
43.2 cm W (17") X 34.3 cm D (13k") X 13.3cm H (5
1/4”) (for Rack mounting, handle and brackets make width 48.3 cm
(19").
PROBE:
5.7 cm (2Y4") X 3.2 cm (PA") X 2.5 cm (1") less mounting
plate. Detachable rod is 0.63 cm dia. (1/4 ") X 7.6 cm long (3").
Probe to Mainframe cable is 7 conductor, low noise shielded, 3
meters long (10').
WEIGHT: 10Kg. (20 pounds)
D OPTIONS/ Input Connectors
2400 OPTIONAL HEADSTAGES
2410A Standard Capacitive Neutralized Single ended probe and
cable with connector.
2430A Optional Differential probe for the 2400A System
Input Adapters and Connectors
8012 Additional co-axial input connector
HB120 and HB180 Glass Microelectrode Holders for BNC option input
1mm pins for Tip Jack Option (Order# P657-5 (set of 5))
