DRPB48V Operation Manual
4) Disassemble
clamping sleeve (#3)
:
5) Take out the
3-jaw set (#4)
from the
clamping sleeve (#3)
, then remove the
assembly pusher
(#5),
the
pusher spring (#6)
and
mandrel tube (#20)
from the tool. Once removed, inspect
all parts for wear before cleaning and replacing them. Any damaged parts should be
replaced at this time.
6) Re-assemble the cleaned or replacement parts. Put the
pusher spring (#6)
onto the
assembly pusher (#5)
and insert it back to the tool where
assembly oil cylinder (#13)
is
located
