background image

6

1.5  Signs

The following signs are used on the equipment and in this manual:

 DANGER

   Hazardous 

voltage

 

 

 

Identifi es a hazard that could result in severe injury or death through electrocution.

WARNING

   Various

 

 

 

 Identifi es a hazard that could result in severe injury or death as also damage to the machine, 
other equipment, and/ or environmental pollution.

WARNING

   Pinch 

Hazard

 

 

 

 Identifi es a hazard that could result in injuries, in which some body parts are pinched or 
crushed.

NOTICE

 

 

 

Contains remarks, suggestions or advice.

1.6  Safety regulations

WARNING

 

 

 

If a charge outlet is damaged, take the following steps:

 

 

 

1.  Do not use the damaged charge outlet.

 

 

 

2.  Contact the owner / site operator.

WARNING

 

 

 

Operation after damage or accidents

 

 

 

•  If there is a fi re in or nearby the charger;

 

 

 

•  If the charger was immersed in water, or any other fl uid;

 

 

 

•  If the charger is damaged in any way.

 

 

 

Do not use the charger. Contact the owner / site operator.

CAUTION

   Connector 

locked

 

 

 

 Do not apply a force on the locked cable during the charging process. This might damage the 
inlet and locking mechanism in the Electric Vehicle or damage the charger.

NOTICE

 

 

 

When connecting or disconnecting a connector

 

 

 

1.   Handle cables and connectors with care. Do not drop the cables or connectors. 

Place them back in their respective holders.

 

 

 

Only insert a connector into a suitable Electric Vehicle inlet. Never use excessive force.

CAUTION

 

 

 

No User serviceable parts inside

 

 

 

Do not allow any user to repair or manage the electronics inside.

Summary of Contents for PACCAR PACMOBILE 20



















Reviews: