background image

23

3

Securing the vehicle

Emergency high-voltage shutdown procedure

1. Park the vehicle in a safe place.
2. Apply the park brake.
3. Turn the drive mode switch to 'N' 

(neutral).

4. Remove the ignition key.
5. Press the emergency switch (1) 

located next to the tachograph.

6. Exit the cabin.
7. Press the emergency switch (2) 

located next to the high-voltage 
charge plug behind the cabin.

8. Use the main switch (4) to turn OFF 

the 24 V circuit.

9. Place the necessary and / or 

mandatory warnings and wait on a 
safe distance from the vehicle.

NOTE:  In case it's not 
possible to enter the cabin 
perform step 7 till 9 of the 
emergency high-voltage 
shutdown procedure.

3.3 24V-BATTERIES

Location of the 24V-batteries

The 24V-batteries are located on the rear side within the chassis.

Disconnecting the 24V-batteries

1. Switch the ignition OFF.
2. Switch OFF the main switch (4).

NOTE:  The manual main switch (4) can isolate the 24 Volt power supply 
of the batteries from the vehicle. Only turn the main switch off, after the 
ignition switch has been turned off.

D005285

1

D005278-2

1

2

3

4

5

E506752-2

1

2

3

4

5

DW83211801.book  Page 23  Wednesday, February 12, 2020  11:04 AM

Summary of Contents for CF ELECTRIC



























































Reviews: