19
Normal timer recording
◆
For timer recordings, clock, date, and stations must be set correctly.
◆
Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.
1
Press
MENU
.
Choose "Timer Program" by
pressing
OK
.
There are positions for eight timer
programs.
Press
PR+
or
PR-
to select an
unused program, for example ‘- - - -’
then press
OK
to confirm.
Press
PR+
or
PR-
to select how
often you want to make the
recording, for example, once, weekly
and so on. Press
OK
to confirm.
2
3
PR+/-:SELECT (AV1/AV2)
0-9 :SETUP(PR)
/ :CORRECT MENU:END
PR
--
START TIME
--:--
END TIME
--:--
START DATE --/--
TAPE SPEED
SP
PDC
OFF
TIMER PROGRAM (ONCE)
◆
PR : Use
PR+
if you want to choose
the AV channel (see page 9) or
0
to
9
for other channels.
◆
Start time : Use buttons
0
to
9
to
enter the start time.
◆
End time : Use buttons
0
to
9
to enter
the end time.
◆
Start date : Use buttons
0
to
9
to
enter the date.
◆
Tape Speed : Use
PR+
if you want to
choose LP (see page 17).
◆
PDC : Use
PR+
if you want to switch
PDC on (see page 18).
If PDC does not appear on the screen,
it is not available on your video.
If you want to change any of the
details. Move to the details you
want to change using the and
buttons.
Change the setting using the
PR+
or
PR-
or number buttons
0
to
9
.
These buttons are used
on the following two
pages.
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
PR+/-:SELECT
OK:CONFIRM MENU:END
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
TIMER PROGRAM (ONCE)
PR
01
START TIME
18:10
END TIME
20:30
START DATE
15/08(FRI)
TAPE SPEED
LP
PDC
ON
PR+/-:SELECT (AV1/AV2)
0-9 : SETUP (PR)
/
:CORRECT
OK:CONFIRM MENU:END
