Connecting up the video recorder
4
Place your video
◆
horizontally on a flat, steady base so that air can circulate around it for ventilation.
◆
away from humidity and heat, magnetic fields, such as those from loudspeakers etc.,
and with no heavy objects placed on top.
Fitting the remote control's batteries
Switch off all components when connecting or disconnecting cables.
◆
Unplug the aerial cable from your TV and plug it into the "ANT.
IN" socket of the video.
Plug the short coaxial cable provided into the "ANT.OUT" socket
of the video and the aerial socket of the TV.
◆
Plug a RCA cable into the "RCA” socket of the video and the AV
socket on the TV if available.
This connection will provide best picture and sound quality.
Ask your dealer for an appropriate cable if you do not have one.
Without a RCA cable
, you need to follow the steps described under "If you
are not using a RCA cable" (right page and page 19).
◆
Make sure the rating of the household mains supply matches the rating shown
on the back of the video.
Now plug in the mains lead. The display of the video should now
light.
Fit the batteries as
shown by the
pictures in the bay.
+
–
+
–
1.5 V (AAA)
AC 230 V,
50 Hz
◆
Protect your environment by returning used batteries to your dealer. Since batteries
contain toxic substances they require special disposal methods.
◆
Make sure the batteries are always of the same type and age, and remove them
from the remote control if you are not using it for a long period.
The buttons to
use are marked
on the following
pages.
I
n
i
t
i
a
l
I N S TA L L AT I O N
