Daewoo Solar 300LC-V, Manual

Page: 162 / 658

S0408070K
Page 22 Swing Reduction Gear
INSTALLATION
1. Coat pinion gear with grease. Refer to
operation manual for specifications.
2. Make sure two alignment pins (6, Figure
34) are installed in flange of swing
reduction gearbox (5).
3. Using a suitable lifting device, sling swing
motor (1, Figure 34) and position swing
motor and reduction gearbox (5) as an
assembly on unit.
4. Install twelve bolts and washers (4, Figure
34) to secure swing reduction gearbox (5)
to frame.
NOTE: Apply Loctite #262 to bolt
threads.
NOTE: Tighten bolt to 95 kg•m (690 ft
lb).
5. Connect hose (2, Figure 34) to main frame
by tightening nut (3).
6. Connect grease lubrication line (7, Figure
34) to reduction gearbox (5).
7. Connect hoses as tagged during removal
to swing motor (1, Figure 34).
8. Fill swing reduction gearbox with oil. Refer
to operation manual for specifications.
1
4
6
5
7
2
3
ARS2901L
Figure 34