7
Sienna 4 Slice Toaster
Model No. SDA2484
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Reheat Feature
This feature is used for reheating toast that
has previously been made but has gone cold.
Place the slices of toast into the Bread Slots
(7), push the Bread Carriage Lever (1) down
then immediately press the Reheat Button (4
– arrowed right). The Bread Carriage Lever (1)
will pop up once the reheat cycle has
completed.
If you wish to cancel the reheating mode at
any time, simply press the Cancel Button (5).
Defrost Feature
This feature is used for toasting bread from
frozen.
Place the slices of frozen bread into the Bread
Slots (7).
Select the desired browning level using the
Browning Control (2). Slide the control right to
increase browning and left to decrease
browning.
Push the Bread Carriage Lever (1) down then
immediately press the Defrost Button (3). The
Bread Carriage Lever (1) will pop up once the
defrost and toasting cycle has completed.
If you wish to cancel the defrosting mode at
any time, simply press the Cancel Button (5).
DO NOT insert bread slices that are too thick for the Bread Slots, always ensure
that the Bread Carriage Lever (1) is free to move up and down.
Care and Use of your Toaster
Always disconnect the toaster from the mains
power supply and allow to cool before cleaning.
After each use remove the Crumb Tray (6) from
the toaster and empty out any crumbs.
Clean outside of the toaster with a clean damp
cloth. Never clean with harsh or abrasive
cleaners.
Do not submerge any part of the toaster in water
or any other liquids.
Do not use metal implements (i.e., Knife, fork,
etc.) to remove trapped debris.