9
Sienna 1.7L 3kw Rapid Boil Kettle - Taupe
Model No. SDA2482
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Replacing the Filter (2)
Care and Use of Your Kettle
•
Ensure the mains plug is removed from the socket outlet before cleaning.
•
Do not immerse the kettle or the base in water or any other liquids.
•
Wipe the kettle clean with a clean damp cloth.
•
Do not use harsh or abrasive scouring pads, powders or cleaners.
•
Do not clean any part of the kettle in a dishwasher.
Troubleshooting Guide
Problem
Possible Cause
Possible Fix
Kettle not boiling
On Off Switch is not
pressed down.
Press the On Off Switch (6)
down.
Plug not inserted into
the mains socket and/or
not switched on.
Ensure the mains plug is
plugged into the mains socket
and the socket is switched on.
Kettle not seated on the
base correctly.
Ensure the Kettle is seated
correctly on the base (7).
Fuse blown in plug.
Check fuse by substitution.
Kettle switches off
before boiling.
Not enough water in the
Kettle.
Ensure the Kettle is filled with
sufficient water and the water
level is above the
‘MIN’ mark
on the Water Gauge (5).
Kettle requires
descaling.
Follow ‘Descaling your
Sienna
Kettle’ above
.
Kettle boils over.
Kettle is overfilled.
Ensure that the Kettle is not
filled above the
‘MAX’ mark on
the Water Gauge (5).
The
Filter
(2) is located inside the kettle
behind the
Spout
(1) and is accessible
from inside the kettle when the
Lid
(3)
is removed.
Remove the
Lid
(3) using the lid
handle. Press down on the filter
retaining clip and then pull out the
Filter
(2) upwards as shown left.
Replace the
Filter
(2) by pushing it back
inside the kettle behind the
Spout
(1)
and then replace the
Lid
(3).
Filter