8
2 Slice Stirling Toaster Black
Model No. SDA2627
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Defrost
•
This feature is used for toasting bread from frozen.
•
Place the slices of frozen bread into the
Bread Slots
(1).
•
Select the desired browning level using the
Browning Control
(4), rotate the
Browning Control
(4) clockwise to increase
browning and anti-clockwise to decrease browning.
•
Push the
Bread Carriage Lever
(2) down and the lever will lock
down and then immediately press the
Defrost Button
(5).
•
The
Bread Carriage Lever
(2) will pop up once the reheat cycle
has completed.
•
If you wish to cancel the reheating mode at any time, simply
press the
Cancel Button
(3).
Care and Use of your Toaster
•
Always disconnect the toaster from the mains power supply and allow to cool
before cleaning.
•
After each use remove the
Crumb Tray
(7) from the toaster and empty out any
crumbs.
•
WARNING!
Do not use the toaster without the
Crumb Tray
(7) fitted.
•
Clean outside of the toaster with a clean damp cloth. Never clean with harsh or
abrasive cleaners.
•
Do not submerge any part of the toaster in water or any other liquids.
•
Do not use metal implements (i.e. Knife, fork, etc.) to remove trapped debris.
Troubleshooting Guide
Problem
Possible Cause
Possible Fix
Toast is too
pale and
underdone.
The
Browning Control
(4) is on
too low of a setting.
Rotate the
Browning Control
(4) clockwise to a higher
browning number.
The
Cancel Button
(3) has
been pressed.
Leave the toaster to complete
its toasting cycle and the
carriage to pop up.
The
Reheat Button
(6) has
been pressed and therefore
the toasting time is shortened.
Ensure the
Reheat Button
(6) is
not pressed.
Bread is frozen.
Press the
Defrost Button
(5)
after pushing the
Bread
Carriage
(2) down.
Toast is dark
and
overcooked.
The
Browning Control
(4) is on
too high of a setting.
Rotate the
Browning Control
(4) anti-clockwise to a lower
browning number.
The
Defrost Button
(5) has
been pressed and therefore
the toasting time is too long.
Ensure the
Defrost Button
(5) is
not pressed.