Switching on the appliance
Allow the appliance to stand for a minimum of 4 hours after installation.
Plug in the appliance and switch on the mains supply.
Set the thermostat to the required setting (The temperature selector is
situated to the top centre of the icebox, setting 0 = off, setting 3 or 4 are
most commonly used for normal operation, however this can be changed
to your own preferred temperature, with 7 being the coldest setting).
Leave the appliance for 4 hours to reach temperature before use.
NOTE: During periods of high ambient temperatures (ie hot sunny days)
it may be necessary to set the temperature to a higher setting than is
normally used.
In the event of a power failure
If there is a power failure keep the door closed if possible to maintain the
internal temperature. After power is restored it may take some time to
return to the set temperature level.
Energy saving advice
• Do not install the appliance close to sources of heat such as cookers
or radiators.
• Locate the appliance in a well ventilated area.
• Ensure the door seal is clean and there are no tears or rips.
• Do not overload the fridge.
• Never put hot or warm items into the chiller, allow to cool to room
temperature first.
•
The internal light can be switched off manually when required using
the switch on the upper right hand side of the cooler cavity.
Drinks Chiller
SDA2252
User Manual
