Before the first time you use your Hot Plate
Please read these operating instructions thoroughly and keep them in a safe place
for future reference.
Remove all packing materials and discard responsibly.
Before using your Hot Plate for the first time, turn the Thermostat control to the
highest setting (5) for 3 to 5 minutes to condition the protective coating.
NB
This should be the only time the Hot Plate is operated without a cooking
utensil on it.
A pan 15 - 17cm in diameter is recommended for best results. Smaller pans are
not recommended. Ensure larger pans do not protrude beyond the edge of the
Hot Plate or the controls.
Operating Instructions
•
Place the Hot Plate on a solid, level non-flammable surface.
•
Ensure that Thermostat Control is in the off position.
•
Insert the mains plug into the mains socket.
•
Rotate the Thermostat Control clockwise from 0 (low heat) through to 5 (high
heat) and leave at the desired setting. The Neon Indicator will light to show the
hot plate is heating up.
•
Once the hot plate is at the correct temperature and ready to use, the Neon
Indicator will go out.
NB
the Neon Indicator will go on and off during use to show the temperature of
the hot plate is being maintained.
•
Return the Thermostat control to the position and remove the mains plug
from the socket after use.
Care and Use of your Hot Plate
•
Always disconnect the Hot Plate from the mains power supply and allow
to cool before cleaning.
•
Clean the outside of the Hot Plate with a soft damp cloth. Never clean
the Hot Plate with harsh or abrasive cleaners.
•
Do not submerge any part of Hot Plate or its cord in water or any other
liquids.
Technical Data
Voltage
:
220-240V AC 50/60Hz
Rated power
:
1500 W
Model Number :
SDA1731
