Daewoo SDA1685 User Manual Download Page 3

 

 

1.7L 3KW Kettle Kensington Red 

Model No. SDA1685 

User Manual 

IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE 

 

Always use this appliance on a solid, level, non-flammable surface. 

 

Do not use this appliance outdoors. 

 

It is imperative to unplug the power cord after the appliance has been 
used, before it is cleaned and whilst being repaired. 

 

If the supply cord is damaged, it must be replaced by the manufacturer, 
service agent or similarly qualified person in order to avoid hazard. 

 

Repairs to electrical appliances should only be performed by qualified 
personnel. Improper repairs may place user at serious risk. 

 

Do not operate this appliance with a damaged plug or cord, after a 
malfunction or after being dropped or damaged in any way. 

 

Regular, periodic checks should be carried out on the mains cable to 
ensure no damage is evident. Should there be any signs of damage the 
appliance should not be used. 

 

Do not allow the mains cable to hang over sharp edges or come in 
contact with hot surfaces. 

 

Do not run the mains cable under carpets, rugs, etc. 

 

Allow the unit to cool before storage. 

 

Never place the appliance near to flammable material or high-pressure 
containers. 

 

This appliance is intended for household use only and should not be 
used for industrial purposes. 

 

Do not use any accessories or attachments with this appliance other 
than those supplied or recommended by supplier. 

 

Do not immerse the appliance, base or its cord in water or any other 
liquids. 

 

Do not use this appliance for anything other than its intended use. 

 

Do not push objects into any openings as damage to the appliance 
and/or electric shock may occur. 

 

Ensure appliance is situated in an open area, do not allow it to come in 
contact with cupboards, curtains, wall coverings, clothing or other 
flammable materials. 

 

Unplug after each use. Grasp the plug, not the cord. 

 

Do not cover this appliance. 

 

Never place this appliance on an electric, gas, or any other type of hob. 

 

WARNING: Do not open lid whilst the water is boiling. 

 

Never fill the kettle more than its capacity – ensure the water level is 
between the min and max marks. If the kettle is overfilled, boiling 
water may be ejected. 
 

Summary of Contents for SDA1685












Reviews: