8
Glass Toaster
Model No. SDA1060
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Care and Use of your Toaster
Always disconnect the toaster from the mains power
supply and allow to cool before cleaning.
After each use remove the Crumb Tray (9) from the
toaster and empty out any crumbs.
Clean outside of the toaster with a clean damp cloth.
Never clean with harsh or abrasive cleaners.
Do not submerge any part of the toaster in water or
any other liquids.
Do not use metal implements (i.e., Knife, fork, etc.) to
remove trapped debris.
Troubleshooting Guide
Problem
Possible Cause
Possible Fix
Toast is too pale and
underdone
The Browning Control (6)
is on a too lower setting.
Rotate the Browning Control (6)
clockwise to a higher browning
number.
The Cancel Button (4) has
been pressed.
Leave the Toaster to complete its
toasting cycle and the carriage to
pop up.
The Reheat button (2) has
been pressed and
therefore the toasting
time is shortened.
Ensure the Reheat Button (2) is not
pressed.
Bread is frozen
Press the Defrost button (3) after
pushing the Bread Carriage (5)
down.
Toast is dark and
overcooked.
The Browning Control (6)
is on a too higher setting.
Rotate the Browning Control (6)
anticlockwise to a lower browning
number.
The Defrost button (3) has
been pressed and
therefore the toasting
time is too long.
Ensure the Defrost Button (3) is not
pressed.
Non-Wireable Mains Plug
If your appliance is supplied with a non-wireable plug fitted to the mains lead
and should the fuse need replacing, you must use an ASTA approved one
(conforming to BS 1362 of the same rating). If in doubt, consult a qualified
electrician who will be pleased to do this for you. If you need to remove the plug
– DISCONNECT FROM THE MAINS – and then cut it off the mains lead and
immediately dispose of it safely. Never attempt to reuse the plug or insert it into
a socket outlet as there is a danger of electric shock.
