46
Before doubting about troubles (VCR)
•
“Power On” does not work.
•
It does not work even in “Power On”.
•
A videotape is not inputted in.
•
On inputting a videotape, the tape is
re-ejected.
•
A videotape is not ejected.
•
A channel on video and a play screen
does not appear.
•
Noise (screen noise) appears on
screen.
•
Noise appears on screen after
recording.
•
While in playing, noise appears.
•
Sound and screen are irregular.
•
Sound comes out but screen does not
appear.
•
Screen is irregular and stripes appears.
•
"Screen Error" message is displayed
in a screen.
•
While recording and playing, the top
of screen extremely waves.
•
A screen is not clear.
•
A screen at pause is trembling or
slow screen is not clear.
Checks
Symptom
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is inserted in.
➤
Try to insert a plug again.
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is in.
➤
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
➤
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
➤
When a videotape forces to be ejected, the tape may not be inputted. In
the case, please pull out an outlet, and then push the tape smoothly.
➤
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
➤
In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull out
a power plug for about 10mins and then press “EJECT” button.
➤
Please check your antenna’s connection.
➤
TV channel should be fixed on video channel (3 or 4).
➤
Please check your antenna’s signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
➤
Press “TV/VCR” and then let “VCR” is displayed on the display panel.
➤
While in no use of VCR, was it turned on?
➤
While in recording a program, do you watch another channel?
➤
Select TV by pressing [TV/VCR] button on remote control.
➤
While in playing a videotape, there may happen some noise or blot
in the part of the beginning of a videotape or resuming “PAUSE”,
which are not breakdown.
➤
Please press “TRACKING” for better screen. Videotape may be
poor. Try to change it to another one.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
➤
Since VCR Play signals are not stable like a TV signals, screen may
be unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
➤
In case videotape is the one recorded by other products or old one,
stripe may appear on the screen.
➤
Try to adjust the screen by [T/-] button
➤
Try to use a head-cleaner.
➤
Try to use a head-cleaner.
➤
Try to adjust the screen by [T/-] button.
