VCR
O
peration
39
More Functions
Clock / counter display
■
The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The
counter does not count unrecorded parts of the tape.
■
If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Each time you press [DISPLAY] button,
1x: Time and date+current status
Time and date
2x: current status
counter
3x: disappear.
But if you press [CLK/CNT] button, clock and counter on
display window will change each other.
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal ,
press the button to display the PDC icon.
STOP SP PR01 ARD
14:00 14/10 E180 00:48
STEREO ON
V
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
Remaining time and cassette length
Call the player’s “MAIN SETUP”, choose “TAPE CONTROL”.
When you want the player to show the time remaining from the current player tape
position (to find out if there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently
loaded by selecting this function until you reach the correct length.
• Remaining time display is only possible when the cassette is loaded.
TAPE CONTROL
TAPE REMAIN
E-240 01:27
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR+/-:SELECT
OK:CONFIRM SETUP:END
REW SP
GO TO ZERO
0:02:13
CHECK UP!
CHECK UP!
DV6T711P-AP(DESUK)1 02.7.24 11:17 AM ˘
` 39 mac001 300DPI 120LPI
