
24
TROUBLESHOOTING
Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your part may
eliminate the trouble.
SYMPTOMS
CAUSE
POSSIBLE SOLUTIONS
T
here is no power to the VCP.
Noise bars on screen.
Operation key does not work.
Cassette is ejected upon inserting.
Audio output does not change to Hi-Fi
mode.
◆
The power cord is not connected.
◆
The polarity of power cord is not correct.
◆
Tracking is not adjusted.
◆
If the cassette or the VCP is not in
normal condition, every indicator
LED/LAMP lights up and the VCP does
not work.
◆
Safety device works to protect the
cassette when it is inserted incorrectly.
◆
The cassette is recorded in mono VCR.
◆
The first autotracking is executing until
now.
◆
Check the power cord.
◆
Change the polarity of power cord.
◆
Adjust the picture to be clear by
pressing the PLAY key.
◆
Turn off the power and turn on the
power again by pressing the POWER
cord.
◆
Unplug and replug the power cord.
◆
Pull the cassette out (unloading) and
insert it firmly into the cassette
compartment.
◆
The cassette can not be playback in
Hi-Fi mode.
◆
Wait for a second.
DV-SC242WY-RV_GB 01.2.22 2:53 PM ˘
`
24