21
1. How to start
1) Under “Lock” mode, press “Quick ice” button 5 times while touch
“Freezer Set” and “Fridge Set” button at the same time.
2) The front C-LED displays as the right diagram shows
( [Ex.] Time Display of 0003 signifies 3 minutes of power on time.)
3) Press “Freezer Set” button and the following value is displayed successively.
①
Operating Time
②
F-Sensor temperature
③
R-Sensor temperature
④
FD-Sensor temperature
⑤
RD-Sensor temperature
⑥
IM-Sensor temperature
⑦
IR-Sensor temperature
⑧
RT-Sensor temperature
⑨
Filter remaining time until change (First check ; 4,320Hr)
Refer to Filter Information Reset of C-LED of front control panel.
4) Error is displayed only if there is any ; it is skipped if no error.
2. How to stop
1) Touch “Lock” button 1 time.
2) It stops automatically in 4 minutes from the start.
3. All the error codes are reset if they turn to be normal.
4. Error code
INPUT
CONTROL OBJECT
CONTENTS
REMARKS
Temperature Control Buttons
88 Display CLED
ERROR CODE
CONTENTS
F1
F-sensor : disconnection (“Lo”), short (“Hi”)
r1
R-sensor : disconnection (“Lo”), short (“Hi”)
i5
IM-sensor : disconnection (“Lo”), short (“Hi”)
FD
FD-sensor : disconnection (“Lo”), short (“Hi”)
rD
RD-sensor : disconnection (“Lo”), short (“Hi”)
iD
IR-sensor : disconnection (“Lo”), short (“Hi”)
rt
RT-sensor : disconnection (“Lo”), short (“Hi”)
dr
R-Door Switch : defective
dF
F-Door Switch : defective
C1
Cycle : abnormal or defective
F3
Return after defrosting : abnormal or defective(FD-S)
r3
Return after defrosting : abnormal or defective(RD-S)
ES
“Water”, “Crushed ice”, “Cube ice” : error
D2
Display forced defrost mode for A/S
4-13. Error Display
