12
11
EXHAUST FILTER:
■
Remove the plug from the wall socket. (Never pull on the cable, always apply light pressure
to the plug housing)
■
Remove the exhaust air filter cover by pressing the interlock release button.
■
Take out the exhaust air filter and rinse it well under cold, clean water before leaving to dry.
Never clean the exhaust air filter using soap or any other cleaning fluid. This would
destroy the filter!
■
Reposition the exhaust air filter.
■
If the exhaust air filter is heavily soiled, it is to be recommended that the filter be replaced
with a new one.
■
Replace the exhaust air filter cover.
Cleaning the RCC-231 cyclone vacuum cleaner.
As and when necessary, the RCC-231 cyclone vacuum cleaner may be wiped clean using
a damp cloth and a little mild cleaning fluid. Never use abrasive cleaning fluids as these
could damage the appliance surface.
Ensure the notfluid is allowed to seep inside the RCC-231 cyclone vacuum cleaner. Never
place parts in the dishwasher.
Only connect your RCC-231 cyclone vacuum cleaner to the mains power supply once all
pars are completely dry.
From time to time it may also necessary to remove hair and fluff from the wheels in order to
ensure that the RCC-231 cyclone vacuum cleaner remains comfortable to use.
Never oil or lubricate roller bearing in the RCC-231 cyclone vacuum cleaner.
FAULT FINDING:
■
When using a highly technical device do not assume that every irregularity is defect.
Always consult the table first, in order to assess whether you are able to solve the problem
yourself. 1f this does not prove possible, please contact our Customer Service by
telephone.
Problem
Possible causes
Solution / Tip
Suction power is weak
• The secondary air valve
is open.
• Close the secondary air
valve.
• The vacuum hose is
blocked
• Check all of the adapter
parts, valves, vacuum
h o s e t u b e e t c a n d
remove the blockage.
• The filters are not fitted
correctly or they are
soiled.
• Check the filters and
replace them with new
filters where necessary.
The divece does not
switch on
• The plug is not correctly
connected to the wall
socket.
• Check whether the wall
socket fuse is intact. It
could be that the wall
socket itself is defective.
