8
9
■
Power cord rewinding
When not in use, unplug from the electrical power outlet and then press the cord
rewinding button to feed back the power cord.
■
For storage
Insert the plastic holder of the Connecting tube into the unit base or holder
hook on the back unit.
■
Put the combination crevice nozzle in the accessory hole in the bottom of the body
after finishing suction.
TROUBLE SHOOTING GUIDE
■
Please check the following details before you have your appliance repaired in an authorized
servicing department.
Problem
Motor does
not work
1. Check if the power plug is firmly.
inserted into the outlet.
2. Check if the power switch of the
appliance is on.
3. Check if the heat sensitive thermostat
be off due to overheating.
1. Insert the plug back again into the outlet to
secure it is switched on.
2. And then turn the power switch on.
3. After the motor be cool off,the unit will
restart working automatically.
Suction power
becomes
weak
1. Check if the hose, floor brush or
connecting tube is clogged.
2. Check if the dust is full;
3. Check if the air filter is clogged, the
connecting tube is correctly attached.
1. Immediately remove the obstruction.
2. empty dust.
3. Clean the dust bag for reassembly of
connecting tubes.
Power cord
will not fully
feed back
■
Check if the power cord is twisted
Pull out the power cord at its certain length
and rewind it.
Power cord
can not be
taken out
■
The power cord may be twisted
Rewind or pull the cord in or out for sevreral
times by pressing the power cord rewind
button.
Power cord
rewinds itself
■
The inertial rewinding by the cord
rewinder device may lead to be out of
control.
Pull the power cord out in for 4-5 times. If
still rewinds itself, ask for an authorized
servicing department for repair.
No speed
regulation
■
The speed regulation device may be
out of control
Restart the appliance for reuse at several
times, if it is ask for, exactly out of control an
authorized servicing department.
Front cover
t'can be
closed
■
Check if no dust bag is put inside or
the front cover deformd without dust
bag in good position.
Put the dust bag in good position and then
take the appliance to the authorized
servicing department.
Dust full
indicator is
covered by red
indications
■
The, Check if the floor brush hose or
the long connecting
See if the. tube is blocked dust bag is
full and the air filter is clogged.
Immediately remove obstructions away.
Clean or Clean. replace the dust bag the air
inlet filter.
Possible reason
Solution
