Before Asking for Service
■
Before Asking for Service, please check each item below if you have trouble with your cleaner.
8
Problem
Check Point
Measure
Suction power is weak.
The cleaner does not work.
Power cord does not rewind.
When the dust bag is full or
blocked or any of the
accessories is blocked, the
over-heating protection for the
motor is activated.
• Dust bag
• Pipe or hose
• Power cord
• Suction hose
• Power cord
If dust bag is dirty, clean it.
If clogged or blocked, remove the object.
Check if power cord is plugged.
Check if hose is attached fimly into suction hole.
Pull the power cord out a little and press the
cord rewind button.
Switch off and unplug the cleaner and check
the dust bag, accessories and blockages,
then allow the motor to cool down. The
cleaner can be switched on again about 30
minutes.
