Daewoo NEO-V RCP33 Series, Svc Manual

Page: 34 / 57

NEO-V SVC MANUAL
33
6-11. Function Switch Control (Main PCB Location)
Input Output
- Test Switch
- Time Switch
- Short Circuit / Power Saving / As Forced Defrost Mode
selection.
- Time Pass control
A. Test Switch
- Using Test Switch (Part No. SW2) in the Main PCB, short-circuit mode, the Power Saving mode,
As forced defrost mode can be entered.
default Test Switch 1 time Test Switch 2 times Test Switch 3 times
Short Circuit : Off
->
Short Circuit : On
->
Short Circuit : Off
->
Short Circuit : Off
Power Saving : Off Power Saving : Off Power Saving : On Power Saving : Off
As forced defrost : Off As forced defrost : Off As forced defrost : Off As forced defrost : On
* Pushing the Test Switch for 4 times, Test Mode is become default state.
B. Time Switch
- Using Test Switch (Part No. SW1) in the Main PCB, it can send forcedly the time.
①
Short Click the Time Switch (within 1 second)
- 1 min : Click Time Switch one time on MAIN PCB.
②
Push the Time Switch (more than 1 second)
- 30 min : If you press FAST KEY continuously, you can reduce 30 minutes on each 2.5 seconds with buzzer.