17
S p e c i a l F e a t u r e s
Basic Instructions
1. Touch the VENT FAN Pad once for
HIGH speed.
The Display will scroll “HIGH VENT
FAN”.
2. Touch the VENT FAN Pad twice for
LOW speed.
The Display will scroll “LOW VENT
FAN”.
3. Touch the VENT FAN Pad three times
for turning vent fan off.
The Display will scroll “OFF VENT
FAN”.
Using the Vent Fan
To Set Fan to Run for a Specific Time:
1. Start fan by touching the VENT FAN Pad.
2. Program run time.
◆
Touch the TIMER Pad and hold for
3 seconds. Display will show “FAN”.
3. Enter desired time.
4. Touch the START Pad.
To Cancel Timer:
◆
Touch CANCEL/OFF Pad twice.
You can control the 2-speed fan by touching the
VENT FAN Pad.
Basic Instructions
1. Touch the LIGHT Pad once for turning
the cooktop light on.
The Display will scroll “ON LIGHT”.
2. Touch the LIGHT Pad twice for turning
the night light on.
The Display will scroll “NIGHT
LIGHT”.
3. Touch the LIGHT Pad three times for
turning the cooktop light or night light
off. The Display will scroll “OFF
LIGHT”.
Using the Cooktop Light
To Set Light to be on for a Specific Time:
1. Turn on light by touching the LIGHT Pad.
2. Program “ON” time.
◆
Touch the TIMER Pad and hold for 3
seconds. Display will show “LIGHT”.
3. Enter desired time.
4. Touch the START Pad.
To Cancel Timer:
◆
Touch CANCEL/OFF Pad twice.
You can control the cooktop light by touching
the LIGHT Pad.
Note . . .
◆
If the temperature gets too hot around the
microwave oven, the exhaust fan in the vent
hood will automatically turn on the Low
setting to protect the oven. It may stay on up
to an hour to cool the oven. When this occurs,
the Fan Off Pad will not turn the fan off.
◆
If both the fan and light are operating and
the TIMER Pad is touched and held, both
the fan and light will be controlled by the
timer. The Display will alternate between
“FAN” and “LIGHT” one time.
◆
Canceling the timer will cause the timer to
shut off; however, canceling the timer will
not cancel the fan. The fan will continue to
operate until turned off.
Note . . .
◆
If both the fan and light are operating and
the TIMER Pad is touched and held, both
the fan and light will be controlled by the
timer. The Display will alternate between
“FAN” and “LIGHT” one time.
◆
Canceling the timer will cause the timer to
shut off; however, canceling the timer will
not cancel the light. The light will continue
to operate until turned off.
