Daewoo KOR-868G7S, Service Manual

Page: 9 / 33

8
OPERATIONS AND FUNCTIONS
Wattage output chart
The power-level is set by pressing the POWER pad. The chart shows the display, the power level and the percentage
of power.
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
Touch Power pad Power level(Display) Approximate Percentage of Power
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%
Make sure the oven is properly installed and plugged into the electrical outlet.
When the oven door is opened, the turns off.
The oven door can be opened at any time during operation by touching the door release button on the control panel. The
oven will automatically shut off. To restart the oven, close the door and then touch START.
Each time a pad is touched, a BEEP will sound to acknowledge the touch.
The oven automatically cook on full power unless set to a lower power level.
The display will show ":0" when the oven is plugged in.
Time clock returns to the present time when the cooking time ends.
When the STOP/CLEAR pad is touched during the oven operation, the oven stops cooking and all information retained.
To erase all information (except the present time), touch the STOP/CLEAR pad once more. If the oven door is opened
during the oven operation, all information is retained.
If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstruc-
tions and make sure the door is closed securely. The oven will not start cooking until the door is completely closed or the
program has been reset.
1
2
3
4
5
6
7
8