7
Make sure the oven is properly installed and plugged into the electrical outlet
NOTE
1. When setting timer for less than 2 min-
utes, turn the timer past 2 minutes and
then return to the correct timer setting.
2. Various clicking noises may be heard
when turning V.P.C knob. This is normal
and does not affect the operation of your
microwave oven.
OPERATIONS AND FUNCTIONS
1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven
door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Close the door securely.
4. Choose cooking power level by setting V.P.C knob to the
desired position. Refer to cookbook for recommended power
levels.
5. Determine cooking time.
Consult cookbook for recipe timing.
Oven light turns on and cooling fan starts to operate.
Microwave cooking starts.
6. You mayu open the door while the oven is operating.
As soon as the door is opened, the safety mechanims stop the
generation of microwave power and the operation of cooking
timer.
If you wish to change the time during cooking, simply adjust
the timer to the desired time.
7. When the timer reaches zero, a bell will ring and the unit will
turn off.
Oven light turns off. If additional cooking time is needed and
the door is closed, the oven will automatically start when the
timer is reset.
Variable power cooking
On and OFF cycle time of mechanical V.P.C switch is 30 seconds.
When the V.P.C knob is set to the desired poition and timer knob turns to the desired position, the V.P.C switch has a cycle
(ON/OFF time(sec.)) listed below.
Variable power cooking
MAX
(HIGH)
540W
(MED HIGH)
380W
(MEDIUM)
230W
(DEFROST)
120W
(WARM)
ON/OFF time (sec.)
30/0
23.2/6.8
16.5/13.5
9.8/20.2
5/25
Approximate Percentage of Power
100%
77%
55%
33%
17%