12
1. To remove cabinet
1) Remove three screws on cabinet back.
2) Push the cabinet backward.
2. To remove door assembly
1) Remove two screws which secure the stopper hinge
top.
2) Remove the door assembly from top plate of cavity.
3) Reverse the above for reassembly.
NOTE : After replacing the door assembly, perform a check of correct alignment with the hinge and cavity front plate.
Summary of Contents for KOR-637V0S
Page 31: ...30 WIRING DIAGRAM...
Page 33: ...32 Measure Point...
Page 34: ...33...
Page 36: ...35 2 PCB CIRCUIT DIAGRAM...